:::
現在位置首頁 > 系所成員 > 系所師資 > 專任師資 > 教授 > 黃柏文
  • 回上一頁

黃柏文

黃柏文

  • 點閱:6247
  • 推到 : FacebookTwitterplurk
    • 資料來源:醫學工程學位學程
    • 日期:2013/11/18
    姓 名
    黃柏文
     
    教授兼研發長
    研究室
    15-0702B
    教師研究室
    實驗室
    15-0706A
    振動分析實驗室
    分 機
    3324
    電子郵件
    huangbw@csu.edu.tw
    專 長
    有限元素法、結構振動、精密機械

    行政院國家科學委員會個人資料表

    • 基本資料

    中文姓名

    黃 柏 文

    英文姓名

    Huang Bo Wun

    (Last Name)  (First Name)  (Middle Name)

    國籍

    台灣,中華民國

    性別

    男 □女

    出生日期

    月   日

    聯絡地址

    □□□□ 正修科技大學機械系

    高雄縣鳥松鄉833澄清路840號

    聯絡電話

    (公).(07)7310606-3324

    (宅).

    傳真號碼

    (07)7310213

    E-MAIL

    huangbw@csu.edu.tw

     

    • 主要學歷 請填學士級以上之學歷或其他最高學歷均可,若仍在學者,請在學位欄填「肄業」。

    畢/肄業學校

    國別

    主修學門系所

    學位

    起訖年月(西元年/)

    國立中山大學

     

    機械工程研究所

    博士

    1995/ 9 1999 /6

    國立台灣工業技術學院

     

    機械工程研究所

    碩士

    1991 / 9 1993 /6

    國立台灣工業技術學院

     

    機械工程系

    學士

    1989/9 1991/6

     
    • 現職及與專長相關之經歷 指與研究相關之專任職務,請依任職之時間先後順序由最近者往前追溯。

    服務機關

    服務部門/系所

    職稱

    起訖年月(西元年/)

    現職:正修科技大學

    機械工程系

    教授

    2006 / 2

    經歷:光陽工業股份有限公司

    研發中心

    工程師

    1993 /11 1995 /9

    長榮重工

    設計部

    工程師

    1993 /7 1993/11

    正修技術學院

    共同科

    助理教授

    1999 /8 2000/8

    正修科技大學

    機械系

    助理教授

    2000 /9 2003/1

    正修科技大學

    機械系

    副教授

    2003/22006/2

    • 專長 請自行填寫與研究方向有關之學門及次領域名稱。
    1. 機械振動
    1. 結構破壞
    1. 機械固力
    1. 精密機械
     

    表C301                                                             共 8 頁 第 1 頁

    黃柏文教學、研究與服務資料

    Curriculum vitae of Bo-Wun Huang 2009/10/15

    研究發展處 研發長

    醫學工程學位學程 主任

    國立中山大學機械工程博士

    TEL: 07-7310606#3324                

    FAX: 07-7310213

    E-MAIL: huangbw@csu.edu.tw

    高雄縣833鳥松鄉澄清路840號

    國際學術委員與期刊論文編輯

    1. World Academy of Science, Engineering and Technology, Scientific and Technical Committees & Editorial Review Boards.

    2. The Open Mechanical Engineering Journal, Section Editor. (2009, 10 ~)

    3. The Open Acoustics Journal Editorial Advisory Board. (2007, 08 ~)

    4. Journal of Mechanical Engineering and Automation, Scientific & Academic Publishing, Editorial Board Member. (2011, 10~)

    5. International Journal of Research in Engineering and Technology, PSRC, Editor. (2012,6~)

    6. Journal of Precision Machinery and Manufacturing Technology精密機械與製造科技期刊Editorial Board Member.

    曾獲獎項

    1. 榮獲國科會甲種研究獎助

    2. 榮獲1998全國力學學會最佳論文獎

    3. 榮獲2000中華民國振動與噪音學會最佳論文獎

    4. 榮獲2004中華民國振動與噪音學會最佳論文獎

    5. Profiled in Marquis who's who in the world 2005 (被收錄 2005 世界名人錄)

    6. Profiled in Marquis who's who in Science and Engineering 2005 (被收錄 2005 科學與工程名人錄)

    7. 榮獲2000~2010 正修科技大學教學研究獎

    國際與國內學術委員與服務

    1. IEEE, International Conference on Information Engineering and Mechanical Engineering, Program Committee Member.
    2. IEEE, 2011 International Conference on Electric Information and Control Engineering, Program Committee Member.
    3. 9. International Conference on Engineering and Technology Innovation 2011, Advisory Committee Member. (ICETI 2011)
    4. 10. International Conference on Engineering and Technology Innovation 2012 Advisory Committee Member. (ICETI 2012)
    5. 11. International Conference on Mechanical, Production and Materials Engineering 2012, Technical Committee. (ICMPME'2012)
    6. 12. International Conference on Electrical and Electronics Engineering 2012, Technical Committee.  (ICEEE'2012)
    7. 13. International Conference on Computer and Information Technology, 2012, Program Committee Member. (ICCIT'2012)
    8. 14. International Conference on Trends in Electrical, Electronics and Power Engineering. Program Committee Member. (ICTEEP'2012)
    9. 15. International Conference on Machine Learning and Computer Science. Program Committee Member.  (IMLCS'2012)
    10. 16. International Conference on Automotive and Materials Engineering, Program Committee Member. (ICAME'2012)
    11. 17. International Conference on Trends in Mechanical and Production Engineering, Program Committee Member. (ICTMPE'2012)
    12. 18. 2nd International Conference on Mechanical, Automotive and Materials Engineering, Program Committee Member.  (MAME'2012)
    13. 精密機械與製造技術研討會學術委員
    14. 全國機構與機器設計研討會論文委員
    15. 教育部專科學力測驗考科規劃召集人
    16. 教育部專科學力測驗考科命題召集人
    17. 全國技專校院統一入學測驗考科命題召集人
    18. 經濟部 SBIR 計畫審查委員     

    期刊論文

    1. Huang B. W.*, Tseng J. G., Yu P. P., 2012, “A Dynamic Model of a Micro-Stepped Mill with Time-Dependent Boundary Conditions,” Journal of Vibration and Control, Web online published doi:10.1177/1077546312439591(SCI, EI, IF: 1.00)

     

    1. Yu P. P., Huang, B. W.*, 2012, “Time Dependent Buckling and Critical Speed in a Twisted Micro Drilling Process,” Journal of Vibration and Control, Web online published doi:10.1177/1077546311427757 (SCI, EI, IF: 1.00)

     

    1. Hsiao D. R., Huang B. W., Shih N. C., 2012, “Development and Dynamic Characteristics of Hybrid Fuel Cell-Powered Mini-Train System,” International Journal of Hydrogen Energy, Vol. 37, pp.1058-1066. (SCI, EI, IF: 4.053)

     

    1. Yu P. P., Huang B. W.*, Tseng J. G., 2012, “A Study on Cutting Property in Micro Drilling Process,” Advanced Science Letters, Vol. 8, PP. 141-146. (SCI, EI, IF: 1.253).

     

    1. Tseng J. G., Huang B. W. *, 2012, “An investigation on Dynamic characteristics of a Micro Diaphragm Pump,” Advanced Science Letters, Vol. 14, pp. 69-72. (SCI, EI, IF: 1.253).

     

    1. Chien H. L., Pei-Ju Chiu, Huang, B. W., Kuang, J. H., 2012, “Young’s Moduli of Human Tooth Measured using Micro-Indentation Tests,” Life Science Journal, Vol. 9, No. 2, pp.172-177. (SCI, IF: 0.158)

     

    1. Huang, B.W.*, Chang C.H., Wang F.-S., Lin A.D., Tsai Y.C., Huang M.Y., Tseng J.-G., 2012, “Dynamic Characteristics of a Hollow Femur,” Life Science Journal, Vol. 9, No. 1, pp.723-726. (SCI, IF: 0.158)

     

    1. Huang B. W.*, Weng Z. H., and Kuang J. H, 2012, “Residual Vibration of a Tapered Hollow Metal Beam,” Advanced Materials Research Vols. 538-541, pp 2508-2511. (EI)

     

    1. Huang, B. W. *, 2011, “Instability of a Cracked Twisted Beam with Time Dependent Boundary,” Nonlinear Dynamics, Vol. 63, No.4, pp. 627-637. (SCI, EI, IF: 1.743 )

     

    1. Chien, H. L., Huang, B. W., Kuang J. H., 2011, “The Ogden Model for Coronary Artery Mechanical Behaviors,” Life Science Journal, Vol. 8, No.4, pp.430-437. (SCI, IF: 0.158)

     

    1. Huang, B. W. *, Yu P. P., Lee J. N., Kuang J. H., 2011, “Natural Properties of a Micro Mill with Moving Boundary Conditions,” Advanced Science Letters, Vol. 4, No. 4/5, pp. 1673-1677. (SCI, EI, IF.1.253).

     

    1. Huang B. W. *, Kuang, J. H., Tseng J.-G., Wu Y. D., 2011, “Noise Depressed in a Micro Stepping Motor,” Proceedings of World  Academy of Science, Engineering and Technology, Vol. 76, pp.167-171. (EI)

     

    1. Huang, B. W. *, Wang F. S., Ko, J. Y., Tseng, J. G., 2010, “Mechanical Stimulation Effect on Proliferation of Murine Osteoblast Cell,” Life Science Journal, Vol. 7, No.1, pp.62-67. (SCI, IF: 0.158)

     

    1. Huang B. W. *, Cai J. Z. and Hsiao W. L., 2010, “Cutting Force Estimation in a Micro Milling Process,” IMechE, Part B, Journal of Engineering Manufacture, Vol. 224, No. B10, 1615-1619.(SCI, EI)

     

    1. Huang B. W.*, Yu P. P., Kuang, J. H., 2010, “Using Finite Element Analysis on Dynamic Characteristics in a Micro Stepping Mill,” Proceedings of World  Academy of Science, Engineering and Technology, Vol. 69, pp. 8-12. (EI)

     

    1. Huang, B. W. *, 2009, “A Model Of Vibration In Drilling Into A Fiber-Reinforced Composite Materials,” IMechE, Part B, Journal of Engineering Manufacture, Vol. 223, pp. 1107-1114. (SCI, EI ) September.

     

    1. Huang, B. W. *, J. H. Kuang and Yu, P. P., 2009 “Effect of Crack on Drilling Vibration ,” Journal of Sound and Vibration, Vol. 322,  No.4-5, pp. 1100-1116.  (SCI, EI)

     

    1. Huang, B. W. *, Huang Kuang Kung, Kuan-Yu Chang, Bo Kai Hsu, Jung-Ge Tseng, 2009, “Human Cranium Dynamic Analysis,” Life Science Journal, Vol. 6, No.4, pp.15-22. (SCI)

     

    1. Chang K. Y., Chang H. C., Yu P. P., Yen K. T. and Huang B. W. *, 2009, “Natural Properties in a Micro Drill Cutting into Bones,” Life Science Journal, Vol. 6, No.4, pp.28-33. (SCI)

     

    1. Huang, B. W. *, Kuo B. L. and Ye, M. L., 2009, “An Analysis on Vibration of a Micro Stepping Motor System,” Journal of Advanced Engineering. Vol. 4, No. 2, pp.113-117.

     

    1. Huang, B. W. *, Kung, H. K. and Kuang, J. H., 2008, “Modal Localization in Mistuned Tube-Array Structures,” International Journal of Solids and Structures, Vol. 45, No. 11-12, 3192-3202. (SCI, EI,)

     

    1. Huang, B. W. * and Yu, P. P. and Jou, J. M., 2008, “Parametric resonance of a rotating taper pre-twisted beam with a crack,” Structural Engineering and Mechanics, An International Journal. Vol. 28, No. 2, pp. 259-262. (SCI, EI)

     

    1. Kung, H. K. and Huang, B. W. *, 2008 “Vibration in a Cracked Machine Tool Spindle with Magnetic Bearings,” The Open Mechanical Engineering Journal, Vol. 2, pp.41-48. (EI)

     

    1. Huang, B. W. *, Lin, A. D., Cheng, Y. C. and Kuang, J. H., 2008, “A Dynamic Model for a Drill in the Drilling Process,” International Journal of Aerospace and Mechanical Engineering, Vol. 2, No. 4, pp.234-240. (EI)

     

    1. Huang, B. W. *, Lin, A. D. and Fang, Y. L., 2008, “Natural Property of a Micro Mill for Micro Electronic Products Manufacture,” Journal of the Chinese Society of Mechanical Engineers (Accepted, MEMS00001, SCI, EI )

      

    1. Huang, B. W.* and Kuang, J. H., 2007, “The Parametric Resonance Instability in a Drilling Process,” ASME, Journal of Applied Mechanics, Vol. 74, No. 5, pp. 958-964. (SCI, EI)

     

    1. Huang, B. W. *, Kung, H. K. and Kuang, J. H., 2006, “Stability in a Twisted Periodic Blade System with Cracks,” AIAA Journal, Vol. 44, No. 7, pp. 1436-1444. (SCI, EI)

     

    1. Huang, B. W. *, and Kuang, J. H., 2006, " Variation in the Stability of a Rotating Blade-Disk with a Local Crack Defect " Journal of Sound and Vibration, Vol. 294, No. 3, pp. 486-502. (SCI Impact factor 0.828, EI)

     

    1. Huang, B. W. *, 2006 “Effect of number of blades and distribution of cracks on vibration localization in a cracked pre-twisted blade system,” International Journal of Mechanical Science, Vol. 48, No. 1, pp. 1-10. (SCI Impact factor 0.906, EI)

     

    1. Kung, H. K., and Huang, B. W. *, 2006, “High-Temperature Wire Sweep Characteristics of Semiconductor Package for Variable Loop-Height Wirebonding Technology,” Microelectronic Engineering, Vol. 83, No. 2, pp. 197-205. (SCI Impact factor 1.514)

     

    1. Su, Jerry C. T. and Huang, B. W. *, 2006, “Dynamic Characteristics in High Precision Non-Contact Machine Tool Spindles,” Materials Science Forum Vol. 505-507, pp. 157-162. (SCI Impact factor 0.602)

     

    1. Kung, H. K., and Huang, B. W. *, 2006, “On the Wire Sweep Experiments and Predictions of Gold Wire for Semiconductor Wirebonding Technology,” Materials Science Forum Vol. 505-507, pp. 319-324. (SCI Impact factor 0.602)

     

    1. Huang, B. W. *, 2005, “The Crack Effect on Instability in a Machine Tool Spindle with Gas Bearings,” Journal of Sound and Vibration, Vol. 286, No. 4-5, pp. 1001-1018. (SCI Impact factor 0.828, EI) 

     

    1. Huang, B. W. *, Kung, H. K. and Yao, W. L., 2005, “Effect of Periodic Drilling Force on Instability in a Drilling Process,” IMechE, Part C, Journal of Mechanical Engineering Science, Vol. 219, No. 8, pp. 733–742. (SCI Impact factor 0.206, EI)

     

    1. Huang, B. W. *, Kung, H. K., 2005, "Mode Localization of a Component Cooling Water Heat Exchanger" International Journal of Mechanical Science, Vol. 47, No. 2, pp. 170-186. (SCI Impact factor 0.906, EI) 

     

    1. Huang, B. W. *, and Kuang, J. H., 2005, " The Variation of Instability in a Shrouded Blade-Disk with Local Defects," Journal of the Chinese Society of Mechanical Engineers, Vol. 26, No. 2, pp. 183-192. (SCI, EI) 

     

    1. Huang, B. W. *, 2004, " The drilling vibration behavior of a twisted microdrill " ASME, Journal of Manufacturing Science and Engineering, Vol. 126, pp.719-726. (SCI Impact factor 0.577, EI) (0/0)

     

    1. Kung, H. K., Chen, H. S. and Huang, B. W. *, 2004, “Thermal-Fatigue Oxidation of Carbon-Fiber Reinforced Polyimide Composite“, Key Engineering Materials, Vol.261, pp. p1197 –1202. (SCI Impact factor 0.278, EI)  

     

    1. Huang, B. W. * and Kung, H. K., 2003, “A Variation of Instability in a Rotating Spindle System with Various Bearings,” International Journal of Mechanical Science, Vol. 45, No. 1, pp. 57-72. (SCI Impact factor 0.906, EI) 

     

    1. Huang, B. W. *, 2003, " Dynamic Characteristics of a Drill in Drilling Process," Proceeding of the Institution of Mechanical Engineers, IMechE, Part B, Journal of engineering manufacture. Vol. 217, No.2, pp. 161-168. (SCI Impact factor 0.249, EI)  2414

     

    1. Huang, B. W. * and Kuang, J. H., 2002, "The Effect of Local Crack on the Dynamic Characteristics of a Rotating Grouped Bladed Disk" Proceeding of the Institution of Mechanical Engineers, IMechE, Part C, Journal of Mechanical Engineering Science. Vol. 216, pp. 447-457. (SCI Impact factor 0.206, EI) (2/2)

     

    1. Huang, B. W. * and Kuang, J. H., 2001, “Mode Localization in a rotating mistuned turbo disk with coriolis effect" International Journal of Mechanical Science. Vol. 43, No. 7, pp. 1643-1660, (SCI Impact factor 0.906, EI) (3)

     

    1. Kuang, J. H. and Huang, B. W. , 1999, " The Effect of Blade Crack on mode localization in Rotating Blade Disks " Journal of Sound and Vibration, Vol. 227, No. 1, p85-103. (SCI Impact factor 0. 828, EI) (榮獲國科會88學年度甲種研究獎助) (2/2)

     

    1. Kuang, J. H. and Huang, B. W., 1999, " Mode Localization on a Cracked Bladed Disk" ASME, Journal of Engineering for gas turbine and power, Vol. 121, No.2, pp. 335-342. (SCI Impact factor 0. 213, EI) (4/4)

     

    1. Liao, C. L., and Huang, B. W., 1995, "Parametric Instability of a Spinning Pretwisted Beam under Axial Force," International Journal of Mechanical Science, Vol. 37, No. 4, pp. 423-439. (SCI Impact factor 0.906, EI) (11)

     

    1. Liao, C. L., and Huang, B. W., 1995, "Parametric Resonance of a Spinning Pretwisted Beam with Time-Dependent," Journal of Sound and Vibration, Vol. 180, No. 1, pp. 47-65. (SCI Impact factor 0.828, EI) (2/9)

     

    1. Liao, C. L., and Huang, B. W., 1993, "Dynamic Instability of a Pretwisted Beam under Periodic End Axial Force," Journal of the Chinese Society of Mechanical Engineers, Vol. 14, No. 6, pp. 561-574. (SCI, EI)

    計畫資料(近三年)

    1. 95國科會計畫“微型步進馬達系統振動與噪音之分析與對策” 編號NSC 95-2212-E-230-006計畫主持人 696,000
    2. 96產業計畫(明安國際企業) “高爾夫球桿動態特性分析”96正研字第029號 計畫主持人 248,000
    3. 96國科會計畫“重型機車空氣濾清器之振動分析與減振” 編號NSC96 -2622-E-230-001-CC3 計畫主持人 598,000
    4. 96國科會計畫“以超音波振動來改善微鑽針之鑽切過程動態特性與挫曲斷針機構” 編號NSC96 -2221-E-230-015 計畫主持人
    5.  97產業計畫(明安國際企業) “高爾夫球頭振動特性語音質分析”96正研字第0110號 計畫主持人 451,000
    6. 97產業計畫(明安國際企業) “虛擬手臂之高爾夫揮桿模擬、分析與實驗”96正研字第0131號 計畫主持人 617,100
    7. 97產業計畫(億尚精密工業) “LCD製成壓力釜性能改善”96正研字第0156號 計畫主持人 200,000
    8. 97國科會計畫“重型機車空氣濾清器之噪音分析與改善” 編號NSC97 -2622-E-230-002-CC3 計畫主持人
    9. 97國科會計畫“以超音波振動來改善微鑽針之鑽切過程動態特性與挫曲斷針機構(II)” 編號NSC97 -2221-E-230-008 計畫主持人
    10. 98產業計畫(國稅局) “電子半導體生產設備製造業原物料耗用通常水準調查” 編號財高國稅審一科第0980033147 計畫主持人
    11. 98國科會計畫“微型薄膜式幫浦之穩定性與動態特性分析” 編號NSC98 -2221-E-230-007 計畫主持人
    12. 99國科會計畫“微型薄膜式幫浦之穩定性與動態特性分析(II)” 編號NSC99 -2221-E-230-003 計畫主持人
    13. 99國科會計畫“壓力釜之結構強度與壽命改善” 編號NSC99-2622-E-230-009-CC3計畫主持人
    14. 99國科會計畫“人類膝關節與其假體之工程分析與研製計畫” 編號NSC 99-2632-E-230 -001 -MY3 子計畫3主持人(三年期計畫)
    15. 100國科會計畫“微型鏡頭系統之振動與噪音改善” 編號NSC 100-2221-E-230 -014
    16. 101國科會計畫“群組與多裂痕效應對藕合週期性系統之局部振動影響與改善分析” 編號NSC 101-2221-E-230 -001

    國際研討會論文

    1. Huang B.W., D.R. Hsiao, J.-G. Tsneg, J. H. Kuan, 2012, “Vibration Properties and Performance of a Membrane Fuel Cell,” 5TH INTERNATIONAL MECHANICAL ENGINEERING FORUM 2012, Prague, Czech Republic, June 20-22.

     

    1. Huang B.W., Jao-Hwa Kuang, J.-G. Tseng,and Yan-De Wu, 2011, Noise Depressed in a Micro Stepping Motor,” ICAME 2011, International Conference on Aerospace and Mechanical Engineering", Venice, Italy, April 27-29.

     

    1. Huang B.W., Yu P.P., Lee J.N., Kuang J.H., 2010, “Natural Properties of a Micro Mill with Moving Boundary Conditions,” The Proceedings of 2010 International Symposium on Mechanical Science and Technology, Paper No/ A603, Guangzhou, China.

     

    1. Huang B.W., Pu Ping Yu and Jao-Hwa Kuang, 2010, “Using Finite Element Analysis on Dynamic Characteristics in a Micro Stepping Mill,” 2010 International Conference on Mechanical and Industrial Engineering, SG69000, SINGAPORE, August 25-27.

     

    1. Huang B.W., H.K. Kung, S.H. Liang, F.-S. Wang, 2010 “The dynamic study of the femur component of a human knee joint,” 2010 International Symposium on Mechatronic and Biomedical Engineering & Applications, Kaohsiung, Taiwan, November 9.

     

    1. Kuang, J. W. and Huang, B.W, 2009, “Effects of Operating Temperature and Speed on the Stress Variation of Micro-turbo Blades,” 6th Asian-Pacific Conference on Aerospace Technology and Science, Huangshan, China on November 15-19.

     

    1. Huang B. W., Hsiao D. R., Der-Fang Shiau,F.H.Rick Hsiao, 2009, “A Study on Feasibility of Hybrid Fuel Cell-Powered Mini Train System,” International Symposium on Mechatronic and Biomedical Engineering & Applications, Kaohsiung, Taiwan, November 6-7.

     

    1. Huang, B.W, Kuang, J. W., Yen, K. T., Hsiao D. R., 2009, “The Effect Of Fluid Flow On Natural Properties In Multi-Tubes System,” The International Symposium on Unsaturated Soil Mechanics and Deep Geological Disposal of Nuclear Waste, August, Shanghai, China, Paper No. TH001, August 24-29.

     

    1. Huang, B. W., Lin, A. D., Cheng, Y. C. and Kuang, J. H., 2008, “A Dynamic Model for a Drill in the Drilling Process,” Proc. of the Fifth International Conference on Computational and Mathematical Sciences and Engineering, Paper No. 32000, Vienna, Australia.

     

    1. Kuang, J. H., Yin, C. H. , Huang, B. W. and Tsai, J. C., 2008, “Dynamic Characteristics and Residual Vibration of a Golf Club,” Pro of 2008 International Workshop on Sports Engineering and Sports Equipment, Nanjing, P. R. China, August. 5-7, 2008, SBN 978-1-84626-161-9. (EI)

     

    1. Chang H. C., Chang Alex K. Y., Kuo B. L., Yu P. P., Yen Ke-Tien and Huang B. W., “Natural Properties in a Micro Drill Cutting into Bones,” 2008 International Symposium on Mechatronic and Biomedical Engineering & Applications, Kaohsiung, TAWAN, November 6-7, 2008.

     

    1. Huang B. W., Hsiao D. R., Shiau D. F. and Huang K. C., “An Investigation on Efficiency of Solar Cell System,” 2008 International Symposium on Mechatronic and Biomedical Engineering& Applications, Kaohsiung, TAWAN, November 6-7, 2008.

     

    1. Huang, B.W., Kung, H. K. and Kuang, J. H, 2007, “Dynamic Characteristics of a Mistuned Heat Exchanger in Cross-Flow,” Proc. of the ASME 2007 International Design Engineering Technical Conferences, Paper No. DETC2007-34729, Las Vegas, Nevada, USA.

     

    1. Huang, B. W., Lin, A. D. and Fang, Y. L., 2007, “Natural Property of a Micro Mill for Micro Electronic Products Manufacture,” Proc. of Automation 2007, Paper No. MEMS00001, Taipei, TAIWAN.

     

    1. Huang, B. W.,   Kuang, J. H. and Yu, P. P., 2007, “Effect of Crack on Dynamic Characteristics in a Drilling Process,” Proc. of The IFToMM, Paper No. 352, Besancon, FRANCE.

     

    1. Huang, B. W., 2006, “A Mechanical Model for Drilling Process on Free Vibration,” Proceedings of The International Conference on Modeling and Simulation, Paper No.32, 3-5 April, Kuala Lumpur, Malaysia.

     

    1. Huang, B. W. and Kuang, J. H., 2005, “Dynamic Instability in a High Speed Drilling Process,” Proc. of 2005 ASME International Mechanical Engineering Congress & Exposition, Paper No. IMECE2005-80341, November 5-11, Orlando, Florida, USA. (EI)

     

    1. Huang, B. W., 2005, “Instability of a Rotating Pre-Twisted Blade With a Crack,” Proc. of ISCORMA-3, The International Symposium on Stability Control of Rotating Machinery, Paper No. 218, 19-23 September, Cleveland, Ohio, USA.

     

    1. Huang, B. W. and Kuang, J. H., 2004, “Dynamic Response of a Cracked Gas-Bearing Spindle,” Proc. of 2004 ASME International Mechanical Engineering Congress & Exposition, Paper No. IMECE2004-59480, November 13-19, ,Anaheim, California, USA. (EI)

     

    1. Kung, H. K., Chen, H. S. and Huang, B. W., 2003, “Thermal-Fatigue Oxidation of Carbon-Fiber Reinforced Polyimide Composite“ Proc. of The 5th Conference on Fracture and Strength of Solids, Sendai, Japan.

     

    1. Kung, H. K., Chen, H. S. and Huang, B. W., 2002, “Proc. of Application of Image Processing Technique on The Evaluation of Fatigue Damage Parameters for The AS4/PEEK Composite,” Proc. of International Symposium on Experimental Mechanics, Taipei, TAIWAN.

     

    1. Huang, B. W. and Kuang, J. H. 2001, “The Coupled Longitudinal and Bending Vibrations on Stability in a Cracked Blade-Disk,” Proc. of ASME Turbo Expo'2001, Paper No. 2001-GT-281, New Orlean, USA. (EI)

     

    1. Su, Jerry C.T., Huang, B. W. and Kuo, W. F. 2000, “Dynamic characteristics in a rotating spindle system with different bearings,” Proc. of the 18th International Modal Analysis Conference - IMAC ; v 1 ; p 856-861, USA. (EI)

     

    1. Kuang, J. H. and Huang, B. W., 2000, " Mode Localization in a Grouped Bladed Disk" Proc. of ASME Turbo Expo'2000, Paper No. 2000-GT-369, Munich, Gemany. (EI)

     

    1. Kuang, J. H., and Huang, B. W., 1999 "Dynamic Stability in a Cracked Turbo Blade-Disk" Proc. of ASME Turbo Expo'99, Paper No. 99-GT-411, Atlanta, USA. (EI)

     

    1. Kuang, J. H. and Huang, B. W. 1998 " Mode Localization on a Cracked Bladed Disk" Proc. of ASME Turbo Expo'98, Paper No. 98-GT-105, Stockholm, Sweden. (EI)

     

    1. Kuang, J. H. and Huang, B. W., 1997 "Centrifugual Force Effect on the Mode Localization of a Rotating Bladed Disk" Proc. of 15th International Modal Analysis Conference, pp.1517-1524, Florida, USA. (EI)

     

    1. Kuang, J. H., and Huang, B. W., 1997 "Coriolis Effect on Mode Localization in a Rotating Bladed Disk" Proc. of ASME Design Engineering Technical Conference, Paper No. DETC97/VIB-4065, California, USA. (EI)